APOLLO VP100/101- UHF, VHF

The Apollo VP100/101 Voice Pager includes a memory feature that stores the voice messages in the pager for repeat playback. They can be programmed to operate with full compatiblity with all public and private paging systems. VP100 uses double AA battery. VP101 uses charger.

Key Specifications/Special Features:

1. Two tone decoding format
2. Six call per channel / 4 individual and 2 group call
3. 120 seconds memory (1-4 stored voice, each for 30 seconds) optional function feature
4. Loud and clear alert level
5. Large volume control knobs
6. Slide switch with on/off, vibrate, and alert selection
7. Tone and vibrate alert
8. Monitor with carrier squelch

VP100/101 Rich Sophistication:

·Loud and clear alert level: 90dBa at 12 inches distance
·Priority alert programmable
·Monitor channel function
·Audio lock on
·One AA Ni-MH rechargeable battery or one AA alkaline battery
·Fixed alert (not voice) at maximum alert level
·Battery low indicator with special beep tone
·External earphone jack
·Rugged housing with strong belt clip
·Reminder tone with LED flash
·Two status LED:
     ·Red LED light flash when alert, LED on means with unread voice
     ·Green LED blink means monitor On, Green LED on means audio lock

Specifications:

Model VP-100/101 Voice Pager
Tone Coding Two-Tone Sequential
Frequency
 VHF 135~174 MHz, UHF 406~500MHz wideband
Channel Spacing 12.5/25KHz
Paging Sensitivity 5uV per meter
12DB SIAND Sensitivity 12uV per meter
Adjacent channel selectivity 55dB?25KHz
Spurious & Image Rejection 55dB below carrier
Frequency Stability VHF ?10ppm, UHF ?3ppm
Alert Tone

90dBa at 30cm(12")
Voice 87dBa at 30cm (12")
Power Consumption 8.2mA (without power save)
Power Supply One1.5V AA-Size Ni-MH rechargeable battery
Battery Life About 20 days (10 days without battery saver)
Based on 8 hours per day & 5 messages w/ 30 sec. each
Dimension 70(L) x 53(W) x 23(H) mm
Weight (with battery) Approximately 56.5g